A Sacramento pool pump repair requires some mechanical know how and patience. When you’re starting the pump repair, the electrical to the system needs to be turned off and double check that it’s turned off to the pump. While doing a Sacramento pool pump repair, too many times people have been injured or end up getting a jolt of electricity. It’s best to leave your Sacramento pool pump repair to the professionals.
Often when doing a Sacramento pool pump repair, you can leave the pump body attached to the plumbing and detach the pump by undoing the seal plate. Then it’s time to take off the impeller, furthering your Sacramento pool pump repair.
One of the biggest frustrations of a Sacramento pool pump repair is dealing with the impeller. Often the impeller may have been sheared off or welded to the shaft of the pump motor. With a Sacramento pool pump repair, use a 7/16″ wrench and an impeller tool. Once the impeller is off, it’s time to remove the seal plate when continuing your Sacramento pool pump repair. The seal plate is where the shaft seal is. Replacing the seals at this part of your Sacramento pool pump repair is a good idea.
Pop out the old shaft seal and reattach to the new motor to the seal plate. Now it’s time to reattach a new impeller. When doing a Sacramento pool pump repair we recommend using an impeller with a metal connecting shaft over a plastic one.
Now attach the diffuser. The diffuser is the cone that screws to the seal plate. When doing a Sacramento pool pump repair, make sure lube is used before reinserting the motor end to the pump end.
The staff at Sac Valley Pool Service is highly trained and will handle your Sacramento pool pump repair with patience and experience.
TAG: Sacramento Pool Pump Repair